Battery Specifications¶
This section provides the technical specifications for Dingwei Battery models across JIS and DIN standards. Each specification page covers dimensional, electrical, and performance data confirmed to the relevant test standard.
Model Lineup¶
| Model | Standard | Group Size | Voltage | Typical CCA |
|---|---|---|---|---|
| 145G51 (N150) | JIS | N150 | 12V | Confirm per test basis |
| 190H52 (N200) | JIS | N200 | 12V | Confirm per test basis |
| 58827 | DIN | DIN88 | 12V | Confirm per test basis |
| 60038 | DIN | DIN100 | 12V | Confirm per test basis |
Specification Fields Explained¶
Each specification page includes:
- Dimensions — length × width × height (mm), case size
- Terminal type — polarity and terminal layout
- Capacity — amp-hour (Ah) at the C20 rate
- CCA — cold cranking amps, test-basis dependent (JIS/EN/SAE/DIN)
- Reserve Capacity (RC) — minutes at a defined discharge
- Application — vehicle type and usage
Important: CCA Test Basis¶
CCA is not a single universal number. The same battery can show a different CCA under JIS (−15°C) than under EN/SAE/DIN (−18°C). Always confirm the test standard when comparing CCA values. See CCA Testing for the full methodology.
Browse the full model catalog on the main website for machine-readable battery data.